Saturday 25 May 2013

DS Users, read page 23!

Page 23

The DS version comes with a script that slaps your Lalified V4 together, but it needs to know where your Victoria 4.2.cr2 is at. Make sure both the Lali Bits contents AND your Victoria 4.2 is under 'My Library'.

Read page 23 of the manual for more details, that should help you get going!

If you're a DS veteran and you have files ALL OVER THE PLACE, make sure all your V4 installations, morphs, initializers, etc are in one place, preferablely 'My Library'. Go to http://artofdarkness.nfshost.com/vbAOD/showthread.php?p=189207&posted=1#post189207 for all the gory details!

More details tomorrow, off to bed!

X&M Morphs

Preliminary advice (seems to work): First make a Lali V4, export her as a CR2, then run the X&M Perfect script on her. In more detail:

Quote from Sol (member @ Affect3D):

"I do believe injecting the channels into Lali might work, as long as you don't use the the booty fixes, they will probably fight Lalis own stuff.......... Well, it worked! Got a Lali injected with M ++ as well as most of the Perfect V4 fixes, most of them worked, including the shoulder fix, the booty fix messed her up a bit, looked like she had been rammed by a dumpster. But the fixes are all optional so you can just pick and choose anyway. So far there are no problems what I can see. "

21 comments:

  1. thanks and import carrara 6 a 8, lali's bit work?

    ReplyDelete
    Replies
    1. I'll ask someone to test it

      Delete
    2. Ok, so I am trying to create a x&m perfect Lali's Bits in DAZ. So I tried exporting Lali's Bits as a .CR2, but the resulting figure has no pussy. What am I doing wrong?

      Delete
    3. yo, its a long ass story I don't know diddly about! Email me and I'll put you in contact with my friend Poison, he knows all about DS!

      Delete
  2. Hi,

    I can confirm the statment about the Perfect X-M Morphs. The Workflow is also correct. Just remember NOT to use the "Inject all Fixes" option and be selective, then you are be good to go

    ReplyDelete
  3. Oh thank god the X&M morphs work with Lali, that was one of my major concerns. Now I just need to wait for my check to come in so I can reward myself for my patience (that is how you know you have a shopping problem).

    Has anyone tried to export Lali into Genesis using GenerationX? I was able to do it with most of the X&M morphs. I will be testing it myself but I have to wait for my check.

    ReplyDelete
    Replies
    1. hehehe SOME of them do hey?
      thanks for wanting to buy! :)

      Someone else tuned me about GenX but still need to investigate that. I won't be doing it entirely, but feel free to try it! One warning, if you do, make sure you include 'RandomOffsetNeutralizer' to most of the morphs. The JCMs are safe, but most of the pussy morphs need that neutralizer otherwise it will look like shit.

      Delete
    2. Ok,I got them transferred, but havent had a chance to mess around yet. By the way, Ero, GenX is not free unfortunately, so for now, those who want to use it on Genesis will probably need it to get more preferable results. I'll let you know how they work with Genesis later tonight.

      Delete
  4. It mentioned that you need Poser to convert the file to CR2 format. I dont use Poser, so any other ways?

    ReplyDelete
    Replies
    1. if you have the DS version, you can do so in DS itself, I believe. What do you need it for?

      Delete
    2. Sorry, I think I misunderstood your user's manual a bit :D.

      (SAVING AS DUF FILE FOR OTHER VERSIONS(optional *) :

      Anyway I'm getting it later, since its very rare to see options for Daz users in Renderotica.

      I've to admit - you did a very good job there and hope you can release other props for Daz users in the future.

      Delete
  5. Hi, just got the DS version today and I got a slight problem.

    All the files have been copied to the folders as instructed in your user manual.
    Lali's character and the vagina prop loads fine - saved as a .duf file. But when I load this file again I'll get this message -

    'Duplicate formula found in files, make sure that the content is properly installed'

    After that, Daz Studio will shutdown/crash. Anything that I've missed out?

    Thanks

    ReplyDelete
    Replies
    1. http://postimg.org/image/l56ntqr4f/

      Delete
    2. hey, quickly check through this thread:
      https://legacy.renderotica.com/fora/showthread.php?t=5497

      I remember something similar being asked there, but cannot find it. Poison is the guy who knows. If you cannot find it, then post it here:

      http://www.renderotica.com/community/forums.aspx?forumid=2776&threadid=85995&tpage=5

      send me a PM if he doesn't reply. I can try get hold of him.

      Delete
    3. btw ignore the warning of the old website. that's nothing serious

      Delete
  6. Just installed Lali's Bits for Daz Studio (4.8). Figure comes up fine, but with no V4 morphs. The V4.2 is a script that loads a ton of morphs. So I get one or the other. You have a link above about using the V4 Morphs++, etc packages, but it is no longer at Renderotica. Is it available somewhere? Just need to put the two together.
    Thanks,
    David

    ReplyDelete
    Replies
    1. for Morph++ you need to go to DAZ: http://www.daz3d.com/victoria-4-2-morphs

      Its a DAZ product, not Renderotica. Cheers!

      Delete
    2. thanks for buying the bits btw!!!

      Delete
  7. Sorry, I just need to know how to add the bits to a V4 with morphs. I tried saving a loade V4 as cr2, renaming it to the standard V4.2 and it loaded, but it only got your morphs, the 'bits' extra geometry was not there, just the space for it.
    Thanks

    ReplyDelete
  8. I finally found all the individual morph injectors. Rather new to Studio.
    Got it working. Thanks

    ReplyDelete

Hey, because of a sudden influx of spam, I need to moderate comments from now on, unfortunately. I'll try find a work-around in the meanwhile. Cheers!